Network Cable Tester, RJ45 Cable LAN Phone Wire Tester Tool Networking Tool Ethernet Repair

Product Description

Home Installation: The tester is suitable for Cat7, Cat6 and Cat5 RJ45 network cables and RJ11 telephone cables. Widely used when setting up home network installations and making patch cords. Whether you are a professional like an electrician, an IT technician or an amateur, you can use it for Ethernet sockets, security cameras or other devices.

Shield Detection: The switch runs the test at two different speeds. "On" mode is a little faster in terms of test speed and "Slow" mode makes it easier to observe matching lights during the test. The G light can be used to detect whether the cable is shielded or not.

Heavy-duty: The plastic is made of ABS, which is durable, unbreakable and burn-proof. Handy size for carrying around. Note: Just need one 9V battery (not included). If you don't need use the tester for a while, please take off the battery

Package included：1 x Network Cable Tester and 1 x Instruction manual.

18 months warranty

Product Function

Keep your network running smoothly by testing your cables to uncover problematic shorts, open wires, crossing pairs and other wiring mishaps

Use for testing your homemade Ethernet patch cables to make sure they are in working order prior to connecting to your devices

Tests RJ45 cables, RJ11 telephone cables and network cables. Requires one 9-volt battery (not included)

Easy to read LED display indicates problems.Hand-held for portability.

Please feel free to contact us if you face any problems

Features:

RJ45 Port Test

UTP: The lights of the main tester will turn on sequentiy from 1 to 8.

STP: The lights of the main tester will turn on sequentiy from 1 to G.

RJ11 Port Test

6P6C: The lights of the main tester will turn on sequentiy from 1 to 6;

6P4C: The lights of the main tester will turn on sequentiy from 2 to 5;

6P2C: The lights of the main tester will turn on sequentiy from 3 to 4;

Following are abnormal connections:

If one cable, for example cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not turn on.

If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on.

If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on:

Main tester: 1-2-3-4-5-6-7-8-G

Remote tester: 1-4-3-2-5-6-7-8-G

If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on.

If test patch panels or wall plate outlles, two cables which can match each other (RJ45) will be connected to the tester.

If test cables of the same axes, BNC turns on when the cable works.

9V reduplicated battery is used in this tester. Battery is advised to change if any weak light appears.( Battery is not included.)

It steps through each wire and tests each one. If any of them don't work you'll see the light not light up. For example: It lights up 1-2-3-4-5-6-7-8 in order.... If 5 is open you'll see it skip 5 and go to 6.

RJ45 RJ11 Automatic Tester Slow and Fast Mode

Black and Red Supports Detection in PoE

Support RJ45 and RJ11

Cable Tester for RJ11/RJ12/RJ14 Telephone wire and RJ45 LAN cable to uncover problematic shorts, open wires, crossing pairs and other wiring mishaps

Two-In-One Split Design

Push it away by hand to divide the device into two, which is convenient for a device to be tested at a distance

Powered by a 9V battery

Please note that 9V battery is not included, so please purchase it separately when using this product.

High Quality LED Lighting

Adopting LED light beads, energy saving and brighter.

Support Shielded Cable Test

The tester can test unshielded cables and shielded cables

Note: UTP: The lights of the main tester will turn on sequentiy from 1 to 8.

          STP: The lights of the main tester will turn on sequentiy from 1 to G.

Tester Lights

UTP Cable:Lights From 1-8

STP Cable:Lights From 1-8-G

Fast and Slow Switching Mode

One key to switch the slow, fast fault detection mode quickly and conveniently check the wire through the breakage of the situation

High Quality ABS Durable Case

High-quality ABS shell, using engineering plastics, durable impact resistance and drop resistance is not easy to damage.

Two Colors to Choose

Durable PVC Case/ Switch Buttom/ Cable Jacket/ PCB Board/ 9V Battery

Exquisite Workmanship

Fast Finding Wire Faults

Prodcut Size